Watching the birds building the nests, raising their young and the young will fly leave the nest before long seems to be a wonderful experience for you. However, if you wanted to observe this process, you have to get a camera firstly.Vigil Pro from Netvue may be your good choice.

This blog is going to show you how to DIY a bird camera with Vigil Pro in 5 steps:

Step 1: Installation

Mark the Vigil Pro to ensure it will focus correctly. If you want to set up the camera into a bird box, you need to fill small holes for the cord to go in easily. If you want to set up the camera beside the bird feeder or bird box, you can just install a camera under the ceiling or on the wall. Vigil Pro might be satisfying your needs, which can be installed wherever you want with the 10 ft power cord and just connect over Wi-Fi or Ethernet.

Step 2: Performance

If you had observed the birds for a while, you must realize that a reliable waterproof camera is required for bird watching. Vigil Pro outdoor camera is built to withstand all extremely cold or hot weather. With the full metal housing, it is highly vandal-resistant and corrosion-resistant, so you can rely on it to observe birds for years.

Step 3: Night Vision & Motion Detection


Most birds are active at night, so a camera with advanced night vision is really critical for you to see every detail of the birds. Even under the low light condition, birds can be seen clearly through Vigil Pro. In addition, if the camera detects motion activity, it will send you a notification through the App, which may help you save some time to do anything else.

Step 4: Device Storage

Netvue 2 Ways of Storage

There are thousands of birds in the birds, even birdmen may not know all kinds of birds. Therefore, the camera requires sufficient memory to support a long-time recording for you to review the videos. With high-efficiency video coding technology, Vigil Pro saves more bandwidth and storage space to record videos. In this case, you can capture all motion activity of the birds and check the information about those unacquainted birds afterward according to the videos.

Step 5: Bird Watching


Connect the camera according to the instrument to check the focus finally then enjoy the watching. Vigil Pro provides proper video without any color distortion, you can just watch the video through your smartphone, tablet, or computer.

Now, a DIY Bird Cam based on Vigil Pro set up! Hope you enjoy bird watching with Vigil Pro

June 30, 2021 — Chenxuan Shen
Tags: how-to

Leave a comment

Please note: comments must be approved before they are published.